Get rid of bathroom condensation

| by Ken Nelson
Get rid of bathroom condensation

Q: I have an area at the top of my bathroom wall where I constantly get condensation. What’s the fix?

A: Obviously the bathroom will get large amounts of water vapor every time some one showers or bathes. But generally if you have good spot ventilation, a fan that draws 80cfm or more out of the bathroom, and run it before, while, and after you shower, your moisture level should be reasonably mitigated. I suspect the problem is more than just excessive moisture in the room.

Every house has the potential for micro-climates. Micro-climates simply mean the temperature and air quality could be different in one corner of the house than another. There could even be different micro-climates within the same room. Factors like, where the heating and cooling ducts are located, how windows let sun in, and insulation voids in the walls and ceilings can create these micro-climates.

However when I hear about moisture in the top part of a wall, whether it's a bathroom wall or bedroom wall, I immediately recommend getting an Infrared Insulation Analysis done on your home. These evaluations are relatively inexpensive and can be unbelievably telling.

In this case I suspect you would find slipped insulation in the wall. This would change the temperature of the wall allowing condensation to be excessive once you increased the water vapor level in the bathroom.

Slipped insulation is a common occurrence, especially in older homes. Staples will rust and disintegrate, and cavity fill will compact and settle, leaving voids where the interior wall will not hold heat.

If an analysis points to insulation slip, you'll want to consult with a professional insulator for solutions. In the mean time you should manage the humidity in the bathroom by running your ventilation fan longer, possibly even increasing the size of the fan to help remove this excess moisture.

This type of micro climate is often most visible in the bathroom and kitchen. These locations can inject unnatural volumes of water vapor into your home. That water vapor condensing on the walls is a natural indication of surface temperature differences.

Additionally, if you can see standing moisture on your walls, you should wipe it down with a towel. Long term moisture on any interior wall does not bode well for the wall or the humans inside who will have to breathe the mildew bloom that will inevitably occur.

Note: Ken Nelson, of Panasonic, will be exhibiting at the EEBA conference in Scottsdale, Ariz. this week and if anyone wants to come by with ventilation questions, he will be happy to answer what he can.

Topics: Bathroom, Indoor Air Quality

Companies: Panasonic High Performance Ventilation Solutions

Ken Nelson
Ken Nelson is the Northwest Regional Sales Manager for the Panasonic Eco Products Division, specializing in ventilation solutions for residential and multi-family living environments. Over the past four years, Ken has spoken throughout the Northwest, teaching and training builders, building science advocates and professionals on the physics of moisture and air movement in homes of all sizes, types and age. View Ken Nelson's profile on LinkedIn

Sponsored Links:

Related Content

Latest Content

Get the latest news & insights





Social Entrepreneur on the leading edge of best practices for the Tiny Home movement